济南推拉蓬不仅外形美观，而且性价比高，逐渐受到人们的喜爱。那么这类推拉蓬如何施工才更稳定呢？下面小编为您解说几点。

Jinan sliding awning is not only beautiful in appearance, but also cost-effective, and gradually loved by people. So how can the construction of such push-pull awning be more stable? Here are some explanations for you.

1.检查钢丝绳。立钢丝绳的安装是一件非常重要的事情。我们需要仔细检查钢丝绳或保护套上是否有磨损信息。一旦有磨损，需要立即更换，以防发生事故。

1. Check the wire rope. The installation of vertical steel wire rope is a very important thing. We need to carefully check the wire rope or protective sleeve for wear information. Once there is wear, it needs to be replaced immediately to prevent accidents.

2.制定标准化济南推拉蓬。济南推拉蓬的强度和韧性关系到整个看台的稳定性。如果不合格，倒塌事故发生的概率将大大增加。我们需要严格按照标准仔细检查其切割精度、钻孔直径、连接结构等。

2. Formulate standardized Jinan Tulapong. The strength and toughness of Jinan sliding awning are related to the stability of the entire stand. If it is unqualified, the probability of collapse accident will be greatly increased. We need to carefully check the cutting accuracy, drilling diameter, connection structure, etc. in strict accordance with the standards.

3.检查推拉蓬装置的安装情况。作为推拉蓬支架的基础设施，各单元需要我们仔细检查膜单元的边界与附着结构是否连接正确。制造过程中的材料和粘贴痕迹要清晰，各种施工区域和精度要达到相关标准，这样膜单元才能更好的连接，从而使整体结构更加完善.

3. Check the installation of the sliding roof device. As the infrastructure of the sliding roof support, each unit requires us to carefully check whether the boundary of the membrane unit is correctly connected to the attachment structure. The material and pasting traces in the manufacturing process should be clear, and the various construction areas and precision should meet the relevant standards, so that the membrane units can be better connected and the overall structure can be more perfect

此外济南推拉蓬的钢材如果长期暴露在天气等自然力量的作用下，必然会生锈老化，自身的承载能力会下降，建筑的美观也会受到影响。

In addition, if the steel of Jinan Sliding Canopy is exposed to natural forces such as weather for a long time, it will rust and age, its bearing capacity will decline, and the beauty of the building will also be affected.

因此，防腐也是推拉蓬厂家设计中需要解决的常见问题。目前济南推拉蓬厂家的做法主要是采用新型防腐蚀和结构材料。在实际的建筑设计中厂家对所设计的建筑提出了特殊的要求，如涂装防锈涂料、防火涂料等。

Therefore, anti-corrosion is also a common problem that needs to be solved in the design of the push-pull awning manufacturers. At present, the practice of Jinan sliding awning manufacturers is mainly to use new anti-corrosion and structural materials. In the actual architectural design, the manufacturers put forward special requirements for the designed buildings, such as anti rust coating, fire retardant coating, etc.

防火涂料的一般做法是先刷两层红铅防锈底漆，再刷钢结构面漆两层(面漆颜色由甲方确定)。此外，钢结构建筑的钢结构构件施工也有一定的要求，如构件出厂前刷一层红铅防锈底漆;钢结构安装调整完毕后，应将其清洗干净，再刷底漆一遍、面漆两遍。

The general practice of fire retardant coating is to brush two layers of red lead antirust primer first, and then two layers of steel structure finishing coat (the color of finishing coat shall be determined by Party A). In addition, the construction of steel structure components of steel structure buildings also has certain requirements, such as brushing a layer of red lead anti rust primer before the components leave the factory; After the installation and adjustment of the steel structure, it shall be cleaned, and then painted with one coat of primer and two coats of finish.

事实上，推拉蓬的长期使用是建立在良好的保护和管理的基础上的，忽视保护管理容易造成重大事件，这一点要多加注意，您可以来我们网站https://www.lantianpengmo.com进行咨询！

In fact, the long-term use of Tulipong is based on good protection and management. Ignoring protection and management is likely to cause major events. Pay more attention to this. You can visit our website https://www.lantianpengmo.com Consult!