济南推拉蓬结构工程施工过程中，有时会遇到阴雨天气。雨天施工应注意哪些事项，确保施工呢？让我们一起来看看吧。

During the construction of Jinan sliding roof structure project, rainy weather is sometimes encountered. What should be paid attention to during construction in rainy days to ensure safe construction? Let's have a look.

1.在雨天施工时，应设置临时避难所。雨不应落在热焊缝上。如焊接处潮湿，需在焊接前用干布擦拭，并用氧乙炔火焰擦拭，以保持焊接处干燥，无残留湿气。

1. Temporary shelters shall be provided for construction in rainy days. Rain shall not fall on hot welds. If the welding place is wet, it shall be wiped with dry cloth and oxyacetylene flame before welding to keep the welding place dry and free of residual moisture.

2.吊装过程中，若部件上有积水，应在安装前，但不得损坏涂层。安装高强度螺栓接头时，部件的摩擦面应清洁，无水滴，不得接触雨水、污垢、油污等污物。

2. During hoisting, if there is water on the parts, it shall be removed before installation, but the coating shall not be damaged. When installing high-strength bolt joints, the friction surfaces of the components shall be clean, free of water drops, and shall not be exposed to rain, dirt, oil and other contaminants.

3.济南推拉蓬结构工程构件不能在雨天涂装。

3. The structural components of Jinan Sliding Canopy cannot be painted in rainy days.

4.济南推拉蓬不得在雨天和5级以上大风天气施工。

4. Jinan sliding awning shall not be constructed in rainy days or windy weather above level 5.

5.雨天，由于空气潮湿，焊条应存放在防潮烘烤中。同一覆盖电极重复烘烤次数不得超过两次，管理人员应及时做好烘烤记录。

5. On rainy days, due to the humid air, the welding rods should be stored in the damp proof baking. The repeated baking times of the same covered electrode shall not exceed two times, and the management personnel shall timely make baking records.

6.推拉蓬工程在雨天和大风天气工作时，对柱、主梁、支座等大型构件应立即进行修正，位置修正后应立即进行固定，防止单侧失稳。当天安装的组件应形成空间稳定体系。

6. When the sliding roof works in rainy and windy weather, the column, main beam, support and other large components shall be corrected immediately, and fixed immediately after the location correction to prevent unilateral instability. Components installed on the same day shall form a space stability system.

此外要检查推拉蓬装置的安装情况。作为济南推拉蓬支架的基础设施，各单元需要我们仔细检查膜单元的边界与附着结构是否连接正确。

In addition, check the installation of the sliding roof device. As the infrastructure of Jinan sliding roof support, each unit requires us to carefully check whether the boundary of the membrane unit is correctly connected to the attachment structure.

制造过程中的材料和粘贴痕迹要清晰，各种施工区域和精度要达到相关标准，这样膜单元才能更好的连接，从而使整体结构更加完善。更多相关事项就来我们网站https://www.lantianpengmo.com咨询了解吧！

The material and pasting traces in the manufacturing process should be clear, and the various construction areas and precision should meet the relevant standards, so that the membrane units can be better connected and the overall structure can be more perfect. Come to our website for more information https://www.lantianpengmo.com Ask and understand!