济南停车棚在我们生活中的应用范围已经越来越广泛的时候，重要的就是对于的安装。那在这其中需要满足哪些技术性的要求呢?就让我们仔细看一看吧!

Jinan parking shed has been more and more widely used in our life. The important thing is the installation of the shed. What technical requirements need to be met? Let's take a closer look!

一，在安装的时候应该严格按照固定的程序进行，对于它的安装包括了三个部分，一是展开，二是固定，三是成形，三者有着先后顺序，决不可颠倒进行。

1、 The installation should be carried out in strict accordance with the fixed procedures. The installation includes three parts, one is expansion, the other is fixation, and the third is forming. The three parts have a sequence and must not be reversed.

二，和其它建材相比，还是比较脆弱的，而在安装的过程中肯定要在其表面进行操作。为了避免对它造成伤害，要求在膜面上设置一层网，其次就是要求施工者穿上较软的鞋子。

2、 Compared with other building materials, it is still fragile and must be operated on its surface during installation. In order to avoid causing damage to it, a layer of safety net is required to be set on the membrane surface, and then the constructor is required to wear soft shoes.

三，对于的安装要考虑到天气状况，如条件比较恶劣，比如风力较大、雨水较多的时候应该停止施工，待恶劣天气过后再重新进行。因为风力较大的话，膜面以及下面的支柱容易出现颤动，既影响施工效果，也影响人员的。而雨水较多也容易使雨水在膜面上堆积。

3、 For installation, the weather conditions shall be taken into consideration. If the conditions are relatively bad, such as strong wind and heavy rain, the construction shall be stopped, and the construction shall be resumed after the bad weather. Because of the strong wind force, the membrane surface and the pillar under it are prone to flutter, which affects the construction effect and the safety of personnel. And more rain is also easy to accumulate on the membrane surface.

四，对于已经施工好的膜面一定要采取保护措施，以免在进行其它工作的时候原有的工程受到损坏

4、 Protective measures must be taken for the membrane surface that has been constructed to avoid damage to the original project during other work

五，因为具有良好的拉力，而不同的建筑所需要张拉的程度是不一样的，所以在建造之前应该先确定好张拉的大小，而在后期施工的时候更要严格控制。

5、 Because it has good tension, and the degree of tension required by different buildings is different, so the size of tension should be determined before construction, and it should be strictly controlled during later construction.

对于停车棚的一些组装工作，一定要严格遵循工艺标准，如果主要的连接件还没有安装，那要先用牢固的压绳固定好，以免建筑出现晃动。有需求可以和我们https://www.lantianpengmo.com联系！

For some assembly work of the parking shed, the process standards must be strictly followed. If the main connectors have not been installed, they must be fixed with a firm pressure rope to avoid shaking of the building. You can contact us if you need https://www.lantianpengmo.com Contact!